Gravel 743 | Rider-Ready | Seven Cycles skip to content
Current Lead Times: Simple-Custom Framesets: 1 week. Full Custom Bikes: 7 weeks.

U.S. Built Custom Bicycles in Titanium and Titanium-Carbon Mix

Gravel + Road 743 Titanium:
Performance Riding On 700c x 43 to 28 mm Tires

gravel bike
Navigate: All Rider-Ready Models Design Your Seven Features Geometry Why Gravel 743? Why Seven? Email us questions

Design Your Bike

Choose Your Frameset's Features

Complete bikes start at $6,067.

Review the typical frameset features.

Design Your Frame

(required, choose one) Details


(Choose your frame stack height) (required, choose one) Details


 (required, choose one) Details


Shifter and Brake Routing (required, choose one) Details
Note: All brakes require full housing. External routing uses zip guides.










Seatstay Type (required, choose one) Details



Dropout Type (required, choose one) Details



Upgrades Available Details




(required, choose one) Details

Design Your Bike

Not all sizes may be available for all models.

(required, choose one)  Details


Crank Length:
              

(required, choose one)  Details


(required, choose one)  Details








(required, choose one) 


(required, choose one) 


Handlebar Width: measured center to center
                    

Stem Length: Details
                    
Stem angles are 83/97 degrees

(required, choose one) 


Total estimated price: $6,067

Choose Your Frame Size & Fit

First, choose your frame size (top tube length). Once you have that, then choose your front end height (or frame stack height) to dial in your perfect fit.

Three Rider Fit Profiles

We offer three distinct fit profiles in 12 sizes each.

Fit Profile Fit Description Position Variants,
relative to the other two fit profiles
Standard Fit A neutral fit position for gravel riding. Our most popular geometry works well for the majority of riders. Similar to the industry's common gravel bike fit. Neutral. From which all other fits are compared.
Endurance Fit Slightly more upright and shorter than our standard gravel position. Better for long rides where comfort is as important as performance. This fit profile can also be better for exploring unknown territory. Compared to our Standard Fit:
  • The front end height and handlebar position is about 3.0 cm (1.2") higher.
  • The reach from saddle to handlebar is about 1 cm (0.4") shorter.
Aero Fit Slightly lower and longer front end than our standard gravel position. Better for aggressive rides where speed is the goal and comfort is not of concern. Compared to our Standard Fit:

seven-stack-top-tube-chart-gravel-3

Standard Fit Frameset Geometry

Seven's Standard Fit Profile: A neutral fit position for gravel riding. Our most popular geometry works well for the majority of riders. Similar to the industry's common gravel bike fit.

Complete frameset details are on the standards and component interfaces page.

Choosing the right size: If you need help deciding which fit profile and size you should ride, visit a bike fitter to determine your ideal size. Seven does not make size recommendations remotely.

Fit Geometry Specifications (Stack & Reach)

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Frame stack,
BB-HT[3]		55.2 cm55.4 cm55.4 cm55.7 cm56.3 cm57.3 cm58.3 cm59.3 cm60.3 cm61.5 cm62.8 cm65.4 cm
Frame reach,
BB-HT[4]		36.7 cm37.7 cm37.7 cm37.9 cm38.0 cm37.9 cm38.6 cm39.1 cm39.5 cm39.8 cm40.4 cm41.3 cm
Standover height[1] [5]71.2 cm73.7 cm75.0 cm76.2 cm77.4 cm78.9 cm80.0 cm81.1 cm82.1 cm83.2 cm84.7 cm87.4 cm
Rider height range (ft)[6]4' 10" to 5' 2"5' 0.5" to 5' 4.5"5' 2" to 5' 6"5' 3" to 5' 7.5"5' 5.5" to 5' 10"5' 8" to 6' 1"5' 10" to 6' 3"5' 11.5" to 6' 4.5"6' 0.5" to 6' 5.5"6' 1.5" to 6' 6.5"6' 3" to 6' 7.5"6' 4.5" to 6' 9"
Rider weight range (lbs)[7]105 to 135125 to 155130 to 165140 to 170150 to 190155 to 195160 to 200165 to 205170 to 210175 to 215180 to 225195 to 245

Performance & Handling Geometry

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Head tube length11.4 cm11.6 cm11.8 cm12.2 cm12.9 cm13.9 cm15.0 cm16.3 cm17.3 cm18.7 cm20.1 cm22.9 cm
Head tube angle70°70.5°70.5°70.5°70.75°71°71°71°71°71.25°71.25°71.5°
Seat tube angle77.75°76.75°75.75°75°74.25°73.5°73.5°73.25°73°72.75°72.75°72.5°
Bottom bracket drop8.3 cm8.1 cm7.9 cm7.8 cm7.7 cm7.6 cm7.6 cm7.4 cm7.4 cm7.2 cm7.2 cm7.0 cm
Bottom bracket height27.1 cm27.3 cm27.5 cm27.6 cm27.7 cm27.8 cm27.8 cm28.0 cm28.0 cm28.2 cm28.2 cm28.4 cm
Chainstay length43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm
Front center[8]60.2 cm60.7 cm60.7 cm60.9 cm60.9 cm60.9 cm61.9 cm62.7 cm63.4 cm63.9 cm64.9 cm66.4 cm
Seat tube length[9]36.0 cm40.0 cm42.0 cm44.0 cm46.0 cm48.0 cm49.0 cm50.0 cm51.0 cm52.0 cm53.5 cm56.0 cm
Top tube slope20°15°13°11°9°8°8°8°8°8°8°8°

Endurance Fit Frameset Geometry

Seven's Endurance Fit Profile: Slightly more upright and shorter than our standard gravel position. Better for long rides where comfort is as important as performance. This fit profile can also be better for exploring unknown territory.

Complete frameset details are on the standards and component interfaces page.

Choosing the right size: If you need help deciding which fit profile and size you should ride, visit a bike fitter to determine your ideal size. Seven does not make size recommendations remotely.

Fit Geometry Specifications (Stack & Reach)

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Frame stack,
BB-HT[3]		55.3 cm56.7 cm57.5 cm58.3 cm59.3 cm60.3 cm61.3 cm62.3 cm63.3 cm64.5 cm65.8 cm68.4 cm
Frame reach,
BB-HT[4]		36.6 cm37.4 cm37.2 cm37.2 cm37.1 cm37.0 cm37.7 cm38.1 cm38.6 cm38.9 cm39.5 cm40.4 cm
Standover height[1] [5]71.6 cm74.3 cm76.1 cm77.2 cm78.8 cm79.9 cm80.9 cm82.1 cm83.1 cm84.2 cm85.3 cm88.0 cm
Rider height range (ft)[6]4' 10" to 5' 2"5' 0.5" to 5' 4.5"5' 2" to 5' 6"5' 3" to 5' 7.5"5' 5.5" to 5' 10"5' 8" to 6' 1"5' 10" to 6' 3"5' 11.5" to 6' 4.5"6' 0.5" to 6' 5.5"6' 1.5" to 6' 6.5"6' 3" to 6' 7.5"6' 4.5" to 6' 9"
Rider weight range (lbs)[7]105 to 135125 to 155130 to 165140 to 170150 to 190155 to 195160 to 200165 to 205170 to 210175 to 215180 to 225195 to 245

Performance & Handling Geometry

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Head tube length11.4 cm12.9 cm13.9 cm14.9 cm16.0 cm17.0 cm18.1 cm19.3 cm20.4 cm21.8 cm23.1 cm26.0 cm
Head tube angle70°70.5°70.5°70.5°70.75°71°71°71°71°71.25°71.25°71.5°
Seat tube angle77.75°76.75°75.75°75°74.25°73.5°73.5°73.25°73°72.75°72.75°72.5°
Bottom bracket drop8.4 cm8.2 cm8.0 cm7.9 cm7.8 cm7.7 cm7.7 cm7.5 cm7.5 cm7.3 cm7.3 cm7.1 cm
Bottom bracket height27.0 cm27.2 cm27.4 cm27.5 cm27.6 cm27.7 cm27.7 cm27.9 cm27.9 cm28.1 cm28.1 cm28.3 cm
Chainstay length43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm
Front center[8]60.2 cm60.7 cm60.7 cm60.9 cm60.9 cm60.9 cm61.9 cm62.7 cm63.4 cm63.9 cm64.9 cm66.4 cm
Seat tube length[9]36.5 cm40.0 cm42.5 cm44.0 cm46.0 cm47.5 cm48.5 cm49.5 cm50.5 cm51.5 cm52.5 cm55.0 cm
Top tube slope20°17°15°14°13°12°12°12°12°12°12°12°

Aero Fit Frameset Geometry

Seven's Aero Fit Profile: Slightly lower and longer front end than our standard road position. Better for aggressive rides where speed is the goal and comfort is not of concern. Compared to our Standard Fit: The front end height and handlebar position is about 3.0 cm (1.2") lower. The reach from saddle to handlebar is about 1 cm (0.4") longer.

Complete frameset details are on the standards and component interfaces page.

Choosing the right size: If you need help deciding which fit profile and size you should ride, visit a bike fitter to determine your ideal size. Seven does not make size recommendations remotely.

Fit Geometry Specifications (Stack & Reach)

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Frame stack,
BB-HT[3]		55.1 cm55.1 cm54.9 cm54.9 cm55.0 cm55.1 cm55.3 cm56.3 cm57.3 cm58.5 cm59.8 cm61.9 cm
Frame reach,
BB-HT[4]		36.7 cm37.7 cm37.8 cm38.1 cm38.3 cm38.6 cm39.5 cm40.0 cm40.4 cm40.8 cm41.4 cm42.4 cm
Standover height[1] [5]71.3 cm73.9 cm75.3 cm76.1 cm77.2 cm78.3 cm78.4 cm79.5 cm80.4 cm82.0 cm83.0 cm85.6 cm
Rider height range (ft)[6]4' 10" to 5' 2"5' 0.5" to 5' 4.5"5' 2" to 5' 6"5' 3" to 5' 7.5"5' 5.5" to 5' 10"5' 8" to 6' 1"5' 10" to 6' 3"5' 11.5" to 6' 4.5"6' 0.5" to 6' 5.5"6' 1.5" to 6' 6.5"6' 3" to 6' 7.5"6' 4.5" to 6' 9"
Rider weight range (lbs)[7]105 to 135125 to 155130 to 165140 to 170150 to 190155 to 195160 to 200165 to 205170 to 210175 to 215180 to 225195 to 245

Performance & Handling Geometry

Frame size
& top tube, effective[2]		49.0 cm51.0 cm52.0 cm53.0 cm54.0 cm55.0 cm56.0 cm57.0 cm58.0 cm59.0 cm60.0 cm62.0 cm
Head tube length11.4 cm11.4 cm11.4 cm11.5 cm11.6 cm11.7 cm11.9 cm13.2 cm14.3 cm15.6 cm17.0 cm19.4 cm
Head tube angle70°70.5°70.5°70.5°70.75°71°71°71°71°71.25°71.25°71.25°
Seat tube angle77.75°76.75°75.75°75°74.25°73.5°73.5°73.25°73°72.75°72.75°72.5°
Bottom bracket drop8.2 cm8.0 cm7.8 cm7.7 cm7.6 cm7.5 cm7.5 cm7.3 cm7.3 cm7.1 cm7.1 cm6.9 cm
Bottom bracket height27.2 cm27.4 cm27.6 cm27.7 cm27.8 cm27.9 cm27.9 cm28.1 cm28.1 cm28.3 cm28.3 cm28.5 cm
Chainstay length43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm43.8 cm
Front center[8]60.2 cm60.7 cm60.7 cm60.9 cm60.9 cm60.9 cm61.9 cm62.7 cm63.4 cm63.9 cm64.9 cm66.7 cm
Seat tube length[9]36.0 cm40.5 cm43.0 cm44.5 cm46.5 cm48.5 cm48.5 cm49.5 cm50.5 cm52.0 cm53.0 cm55.5 cm
Top tube slope20°14°11°9°7°5°5°5°5°5°5°5°

General Frame & Bike Geometry Notes

Complete frameset details are on the standards and component interfaces page.

Most measurements in centimeters and degrees.

Specifications subject to change.

Fit Geometry footnotes:

  1. Bike geometry calculated with 700c x 43 mm knobby tires.
  2. Top tube length is effective: Starting from the centerline of the head tube and top tube intersection measured horizontally to the ground, back to the seat tube.
  3. Frame stack BB-HT: This is what most bike companies simply call "stack." However, there is frame stack and separately handlebar/stem stack. Seven clarifies frame stack by including BB-HT. Because we only provide frameset specifications (rather than bike specifications), we cannot provide stem stack here.
  4. Frame reach warning: This popular measurement is not a good gauge of proper bike fit. Also, the term is not accurate and, therefore, often causes confusion. Seven qualifies the term with "BB-HT" to help define the measurement. Regardless of these shortcomings, we include frame reach BB-HT because it has become a popular industry shorthand for comparing one bike size to another. While the frame reach numbers Seven shows here are accurate, Seven does not take responsibility for an ill-fitting bike if a fitter relies on the frame reach number. Top tube length combined with stem length is much more relevant and helpful in bike-to-bike fit comparisons.

Fit Geometry footnotes continued:

  1. Standover height is measured midway along the top tube, the actual typical point where a rider stands on a bike. Be aware that this is different from how many production bikes measure standover height.
  2. Rider height range, typical: Choosing a bike size based on height is not wise. We include height ranges because it is a standard industry practice. If you need help deciding what size you should ride, visit a bike fitter to determine your ideal size. Seven does not offer size recommendations remotely. Including size ranges also highlights that most riders could choose from three Rider Ready sizes — as opposed to one for most stock bike alternatives.
  3. Rider weight range: This is the rider in birthday suit, without any clothing, equipment, hydration, etc. To understand Seven's ride weight philosophy and parameters, read our Ride Carry-Weight standards. Ranges shown here are our recommendations for optimal ride performance. However, if your weight is above the recommendation, the bike will still handle and perform significantly better than any stock bike. For specific component weight limits, check with the manufacturer.

Frame Geometry Performance footnotes:

  1. Toe overlap warning: Because toe overlap is determined, in large part, by factors not related to frame geometry, we cannot guarantee that your bike setup will not have any overlap. Make sure you are comfortable with the length of the front center before ordering a bike. You can check your current bike to compare front centers.
  2. Seat tube length is measured from the center of the bottom bracket to the intersection of the top tube's centerline. To determine the total seat tube length from the top edge of the seat top to the center of the bottom bracket, add about 4.5 cm.

Tubeset Stiffness, Performance, & Handling

We offer this frameset in three performance configurations: Benchmark, RocketShip, and SuppleState.

Note: Constant Wall Titanium Tubing: Seven has more than 20 tube diameters and walls to engineer with. These options allow us to fine-tune the bike's ride and performance.

Tubeset designation Benchmark
The Exemplar		 RocketShip
Priority: Stiffness & Agility		 SuppleState
Priority: Resilience & Predictability
What does this mean? This is out most popular performance tubeset. Excellent choice in all situations. Stiffness is the priority. Good for acceleration. Not for comfort. A specialty tubeset. Comfort is the priority. Good for long rides. Not a competition bike —unless that event is 12 hours-plus.
Why choose this tubeset? Ideal for about 80% of riders. Balanced. Most capable over the widest range of use. Excellent at everything. Seven's stiff drivetrain and high smoothness flow. When in doubt, choose our Benchmark tubeset. The best harmony of all possible features. Seven's most popular tubeset choice. Our stiffest Rider-Ready frameset. Stiff in all directions: Drivetrain, torsion, and bump feel. If you're a larger rider or just love the way a stiff frame feels, choose our RocketShip tubeset design. Handling is slightly more agile and quick than average. When a smooth ride is most important choose our SuppleState tubeset design. Good for long distance riding where comfort outweighs flat out acceleration. If you're looking for a more traditional titanium ride feel. Handling is a bit more stable and surefooted than average.
Considerations None. Not ideal for lighter riders, long distance riding, or if you're looking to improve comfort on the bike. Not ideal for larger riders, single-digit-hour competition rides, or carrying more than 15 lb of gear.
Frame weight
For a 54 cm frame, ESTIMATED		 About 1,680 grams
(3 lb 11 oz)		 About 1,750 grams
(3 lb 14 oz) 		About 1,630 grams
(3 lb 10 oz)

Performance Profile Visualized

Why choose one tubeset over another? Each of the three has very distinct benefits.

performance profile

Footnotes:

  1. Seven's standard performance baseline is "100%": The performance that Seven's typical bike in this riding category provides. In general, 100% is excellent performance in most cases. When we specifiy a different percent, it means for this specific model with these specific features, options, and upgrades, we believe the change provides a benefit.
  2. Sustained climbing: Long climbs, usually seated. A lighter, more lively frame can make long ascents quicker.
  3. Punchy climbs are short ascents on which you're pushing big watts or standing for a good portion of the climb. A stiffer tubeset can benefit this kind of climb.
  4. High-speed descending: These are long predictable descents where stability is important. If you want more confidence on long descents, you want more of this trait.
  5. Technical & quick: Your movement on the bike affects the bike's handling, feel, and control. The more amenable your bike is to body English, the more control you have in tight situations: twisty switchbacks, tight corners, and tricky trails.
  6. Weight Balance: Are you doing loaded pack riding? Are you doing minimalistic performance riding? Different cargo levels benefit from different tubeset designs.
  7. Cargo capacity: If you're carrying more than about 14 lb (6 kg) you're starting to get into the cargo-carrying range. That benefits from a bike that leans toward cargo capacity. Stiffer seat stays mean better bike handling when loaded with gear — but a harsher ride when unloaded.
  8. Comfort & flow: Flow encompasses all the positive aspects of a smoother ride and improved tire traction and control. You flow over rocks, roots, broken pavement. You can use body English more actively. Your tires maintain better contact with the ground. Flow is one of the most important and impactful aspects of a performance bike.
  9. Frame Weight: The performance elements of the frame determine the frame's weight. Frame weight is an outcome of ideal bike design rather than an input requirement. A punchier climber will be stiffer. A frameset with more comfort and flow will be lighter. Your choice of ride characteristics determines the frame's weight.

Options & Upgrades

Dropout Type

Seven offers two dropout types for this model. The essential difference is the derailleur hanger:

Integrated derailleur hanger: This is available at no charge. This is the most common option. It is differentiated by having the toughest derailleur hanger on the market. It works with every derailleur type except SRAM electronic Transmission systems.

Universal Derailleur Hanger (UDH) This option is a $95 upcharge. It is universally compatible with every mainstream derailleur including SRAM's unique Transmission system. The weakness of the system is that the hanger is aluminum and will get destroyed repeatedly. It is replaceable but you must ride with spare parts.

For exhaustive details visit our dropout page.

Seat Stay Design

This is a no charge option. Choose either Moto or Inline style stays.

Moto Seat Stays

These are our most popular seat stay design for gravel bikes. In our Rider-Ready series, Motos provide the smoothest ride possible without sacrificing drivetrain stiffness.

moto seat stays
Moto seat stays are our most popular.
Inline Seat Stays

These are our classic s-bend stays that that are the standard by which other stays are judged. Choose Inline stays you want a more traditional aesthetic.

inline seat stays
Inline seat stays provide a more subtle aesthetic.

Upgrades Available

Third bottle mount under down tube

Most bikes have one or two water bottle mounts. You can include a third bottle mount on your Seven if you'd like.

This is a no charge option.

Fender mounts

Our fender mounts include one on each dropout, a chainstay bridge mount, and a seat stay bridge mount that is oriented at 90 degrees to the hub. This is optimized for 99% of all performance fender systems.

This upgrade is $145.

Travel couplers for easy luggage packing

If you travel with your bike, or want to travel with your bike, more than once a year, it may be worth investing in our coupler upgrade. Read all the details and benefits.

This upgrade is $1,995.

Etched Graphics

The price for etched graphics is $250. Most of our graphic options are no charge. Etched graphics are time-consuming. But they look great.

Check out all of our graphic options for this frameset.

Etched, Unified Design

unified blasted graphic

Housing & Cable Routing Options

We offer this frameset with any of our housing routing options. Read the detailed comparison of Seven's housing and cable routing options. Following is a summary of the benefits and considerations of the various cable routing systems.

Housing & Cable Routing Type External Routing InLine Internal Routing IN-Route (Enve) Internal Routing Universal Shifting Routing
Pricing No upcharge $495 upcharge
Why choose this routing? Simple, lightweight, easy to maintain and service. When in doubt, go with external routing. A good balance of the full internal aesthetics without much of the complexity of IN-Route internals. Not available on mountain bikes. Futureproofing. When you're unsure of what parts you might want to ride five years from now.
Considerations Exposed and visible cable stops and housing zip tie guides. Maintenance is required more often, is more expensive, and should be performed by a professional mechanic. Warning: Internal housing routing can cause injury or death if not properly installed and maintained. This is a kitchen sink solution. It looks unusual. This option has ports (for internal routing) AND exposed and visible cable stops and housing zip tie guides (for classic routing).
Seven's InLine internal routing
internal routing head tube single ht gravel carbon
Head tube port for Seven's internal rear brake housing.
Name Style Price Graphic
Slate Blue,
Charcoal Outline
Matte finish		 Unified No charge unified down tube graphic in Slate Blue, White outline
Clear,
White Outline
Matte finish		 Unified No charge unified down tube graphic in clear with white outline
Bronze,
Evening Sky Outline
Matte finish		 Unified No charge unified down tube graphic in Bronze, Evening Sky outline
Etched Unified $250 upcharge unified blasted graphic
a-frame head tube graphic
The A-Frame head tube graphic in matte Slate Blue with Charcoal Outline. The colorways match the down tube graphics. Our A-Frames do not have metal head tube badges as some of our other models do. That's okay. Metal badges don't enhance the performance of your Seven; they just add cost.
internal routing head tube single ht gravel carbon
Seven's USA and handbuilt graphics with world championship colors. Every Seven receives these graphics.

Navigate: All Rider-Ready Models Design Your Seven Features Geometry Why Gravel 743? Why Seven? Email us questions

Typical Frameset Defining Features

Riding Sweet Spot A mix of gravel and road riding. Optimized for classic gravel riding and racing.
Wheel & Tire Size Max-Min Tire Size: 700c x 43 to 28 mm
Gravel Riding: Optimal: 700c x 43 mm
Road Riding: Optimal: 700c x 28 mm

Note: Not designed for 650b wheels. If you're interested in dual wheel gravel bikes, check them out.
Gearing Maximum chainrings:
  • 2x 48/31t
  • 1x 40t (Not all 1x chainring sizes fit equally. Some restrictions apply. Details here.)
Maximum cassette size: Constraints set by rear derailleur specification
Fork Seven's Matador 750 carbon
Optimized for 700c x 43 mm tires. Fender mounts included.
(if the frame is IN-Route full internal house, Enve gravel IN-Route fork is supplied)
Performance & Handling Choose your frameset type:
  • Benchmark: Excellent in all situations; balanced handling
  • RocketShip: Priority is stiffness with agile handling
  • SuppleState: Priority is resilience with predictable handling

See the performance details and definitions.
Frame Size & Fit Choose from 12 sizes (from 49.0 to 62.0 cm top tube) in 3 fits:

See the sizing details geometries.
Frame Specifications Explore the frameset design details.
Frameset weight, estimated 54.0 cm Frame, A-Type: ~1,680 grams (~3 lb, 11 oz) depending on your frameset performance choice.
Fork: ~440 grams, estimated, cut to length for 54 cm frame.

Learn more about our Rider-Ready designs and model offerings.

If you're interested in a full custom Seven, visit our bike offerings page or fill out Seven's Design Guide.

Email us if you have any questions.

seven-gravel-brake-mount
Seven's disc brake mount sets the industry benchmark for stiffness, lightweight, and alignment.
hands-talk-skip
Skip's hands have probably worked on the frameset you'll ride. He's been a framebuilder for more than thirty years.
frame-drawing
Available on all models, Seven's in-house machined full titanium Universal Derailleur Hanger (UDH) system. The strongest and toughest UDH platform available.
"This bike is incredible. The ride is so smooth and responsive. Seriously, I cannot say enough good things about this bike and the entire process. Thank you for all your help and assistance." — Todd P.
Navigate: All Rider-Ready Models Design Your Seven Features Geometry Why Gravel 743? Why Seven? Email us questions

Why is Seven's Gravel 743 the ideal classic gravel bike?

Here are a few reasons:

  • Better handling: Available in 12 sizes and 3 fit profiles, The 743's more precise sizing provides much better rider weight distribution and center of gravity for the best handling of any stock bike.
  • Unparalleled ride feel and fun for two reasons:
    • Each of The 743's 12 frame sizes has a size-specific tubeset with an optimal rider weight range. Rather than a single weight limit for all sizes — as performance carbon bikes seem to have — The 743's optimal weight recommendation provides a ride feel and rider connection that has never been possible with a stock bike.
    • We offer three distinct tubeset styles to meet your needs: Super stiff, our benchmark design, and a super smooth and resilient tubeset.
  • Terrain Versatility: This gravel bike fits up to 700c x 43 mm knobby tires — for serious gravel — down to 32 mm slick tires — when allroads riding calls to you.
  • A new level of control: Again, 12 frame sizes in 3 fits with 12 distinct tubeset profiles and 3 tubeset types. Add to this Seven's innovative application of titanium, and you've got more intuitive body English control than ever.
  • Complete Trust In The Equipment. Titanium for its durability and simple care. Seven's material engineering for longevity.
  • Toughness: Titanium can handle abuse and impacts that would crack, rip, or dent other materials. Nearly impervious to wear damage from grit and grime — unlike carbon. Seven's titanium 3-2.5 alloy is the best material for building the toughest bikes.
  • Better fit because The 743 comes in 3 distinct fit profiles: Our Standard Fit, Endurance Fit, and Aero Fit. Seven's Standard Fit, in 12 sizes, provides a riding position similar to that of popular stock bikes. Our Endurance Fit, in 12 sizes, provides a slightly higher front and has a bit shorter reach. Our Aero Fit is lower and longer than our standard fit. That's 36 sizes to choose from — compared to 5 to 7 for stock bikes. We're confident you'll have a better fit than any stock bike you've ever ridden.

Why a gravel bike from Seven?

Too many reasons. Here are just a few:

  • Applied Experience: Seven gravel bikes have been ridden to multiple pro podiums at the Unbound 200. Sevens have been under winners of the TransAtlantic Way 2,500 km gravel race. Seven's gravel bikes have proven themselves in all conditions, from the brutal 200k Rift Iceland to long-term ultralight bikepacking, and everything in between. Seven has built more mission-specific titanium gravel bikes than anyone else. We bring this knowledge base to every new bike we build. Your Seven will have the same pedigree.
  • More Framebuilding Experience: Most Sevens are built by three artisans — a framebuilder, a welder, and a framewright. On average, these three have over 40 years of framebuilding experience. There are no more experienced titanium builders on the planet. This depth helps us build better bikes.
  • More Titanium Experience: Without a doubt, titanium is the best frame material for gravel bikes. Seven's founders have been building titanium bikes for 37, without interruption, and therefore, longer than anyone else. 30-plus years ago, Seven's founders developed the titanium tube specification that is still widely used today. If you want something built of titanium, there is no more knowledgeable team to work with.
  • Continuous Innovation: One of our founders was racing gravel bikes 37 ago — in the form of drop bar mountain bikes. We thought we were onto something. (Maybe just a couple of decades early.) We've learned continuously since those early days. Fast forward to today: Our latest work on vibration damping and big hit control can be felt in each of these frames. Seven has always pushed the bounds of what's possible on a bike. This design has more of what's proven and none of what's not.
  • Built by riders for riders. Who built your bike? Many of our crew ride gravel bikes as their primary love. We've been riding the local trails for more than three decades, since before mountain bikes became a thing. Some of us cut out teeth in BMX, some in cyclocross, and some just rode into the woods. Whatever the reason to ride, it's all good. And even better in the dirt.
  • Made in the USA. Our founding team has been building bikes in Massachusetts for more than three-and-a-half decades. There are a lot of reasons we build bikes this way. In the end, all that really matters is whether you can feel the difference in the ride. We find that most riders do.