The Ready with Endurance Fit geometry is an excellent choice for long-distance riders. Endurance Fit's position has about a 3 cm higher front end and a slightly shorter reach. A more comfortable position for the long ride.
The combination of our titanium frame and your own personalized build kit means you'll be riding the toughest, most capable gravel bike on the roads and trails.
This is one of the first Evergreen Ready gravel framesets. George is one of our Artisan Framewrights. His jobs include ensuring that each bike rides straight and true; every element of alignment is perfect; all of the component interface are perfect; the finish work and graphics shine. The Ready is a bike worth smiling about — for both the rider and the builder.
Measurements in centimeters and degrees. Bike geometry shown with 700c x 40 mm knobby tires. Specifications subject to change.
Top tube length is effective: Starting from the centerline of the head tube and top tube intersection measured horizontally to the ground, back to the seat tube.
Frame reach warning: This popular measurement is not a good gauge of proper bike fit. Also, the term is not accurate and, therefore, often causes confusion. Seven qualifies the term with "BB-HT" to help define the measurement. Regardless of these shortcomings, we include frame reach BB-HT because it has become a popular industry shorthand for comparing one bike size to another. While the frame reach numbers Seven shows here are accurate, Seven does not take responsibility for an ill-fitting bike if you rely on the frame reach number. Top tube length is much more relevant and helpful in bike-to-bike fit comparisons.
Toe overlap warning: Because toe overlap is determined, in large part, by factors not related to frame geometry, we cannot guarantee that your bike setup will not have any overlap. Make sure you are comfortable with the length of the front center before ordering. You can check your current bike to compare front centers.
Seat tube length is measured from the center of the bottom bracket to the intersection of the top tube's centerline. To determine the total seat tube length from the top edge of the seat top to the center of the bottom bracket, add about 4.5 cm.
Standover height is measured midway along the top tube, the actual typical point where a rider stands on a bike. Be aware when comparing standovers; some companies use differing standards.
Optimal rider weight range: This is a recommendation for optimal ride performance. However, if your loaded weight[7] is above the recommendation, in most cases, the bike will still handle and perform better than any stock bike. For specific component weight limits, check with the manufacturer.
Rider weight, loaded, includes all on-bike attire, equipment, tools, hydration, food, saddle bag, and any other items that weigh something. On average, this total is 14+ lbs. for a three-hour self-sufficient summer ride. Loaded weight does not include the bike.
Specifications subject to change. See the frame specifications page for all other frameset details.
Do not disturb. Matt, a Seven Artisan Framewright, here takes care of the frame's fine points and ensures the bike rides straight and true, along with a hundred other critical and often invisible details. All of which make the bike ride better, last longer, and look good doing it.
