skip to content
Current Lead Times: Rider-Ready Framesets: 3 weeks. Full Custom Bikes: 7 weeks.

U.S. Built Bicycles in Titanium and Carbon-Titanium Mix

What Mountian Bike Magazine courtesy of bikeradar.com: Seven Cycles Sola 29 SLX Frame Review

by Justin LoretzShredding the trails

The most comfortable frame I’ve ever ridden and by default the most enjoyable too.

Quality like this doesn’t come cheap, though.

The Holy Grail, the Golden Fleece, the Ark of the Covenant, a basic understanding of the workings of the female mind – man’s search for each of these things is as fruitless as it is eternal. But one item, which until recently was on that very same list, has been found, at least according to What Mountain Bike’s Justin Loretz. He reckons his custom Seven Sola 29er is the most comfortable lightweight hardtail in the world. Here’s why…

The frame

My Sola 29 SLX was born in Watertown, Massachusetts, USA, in a small but perfectly formed workshop in Walnut Street. It’s the place where Seven Cycles reside and perform some pretty clever frame building magic.

When you order a custom frame, you need to know what you want. I love riding hardtails and I knew I wanted a lightweight frame designed for 29in wheels. However, I didn’t want a steep angled, ‘built to ride like a 26er’ bike or one that would jack-hammer my fragile spine to pulp (I’m 40 years old and have two blown/fused vertebrae in my lower back).

Why a 29er? I’ve raced and ridden 29ers side-by-side with scores of 26in wheeled bikes and hands down, a 29er goes uphill faster. I believe it’s down to the way torque is delivered to the rear contact patch, with the larger wheels smoothing out spikes in your power delivery and providing enhanced traction. As a result, you can get away with using a lighter and faster rolling ‘summer spec’ rear tyre all year round. For a cross-country speed demon, this is a win-win situation. Of course, if you’re convinced you want 26in wheels, Seven can do that too.

With help from the guys at Seven I quickly settled on the Sola 29 SLX as being the right base model for me. Light and lithe are the page tabs it’s filed under – perfect for my spinning, accurate and mildly aggressive riding style, but not so good for stiffness obsessed heavyweights. To nail the geometry I measured up a few bikes that I’d ridden and liked for different reasons, namely a Scott Scale 29er and Niner Air 9 Carbon, to boil down my measurements. The geometry had to deliver a ride that was both fast and stable. It had to be able to confidently chase full- suspension bikes down hills and through testing singletrack, and happily drift on loose fireroads.

Seven Sola

In the end, I went for a 71.5° seat angle and 68.5° head angle – slack compared to the current trend for 29er front ends that are as steep as those on road bikes, but I prefer to give steering input from the saddle rather than having ‘shopping trolley’ steering at the handlebar. With the guys from Seven I double, triple and quadruple checked everything – never a bad thing to do before the ‘go’ button is pressed, especially on a frame as expensive as this. Undoing welds is nigh-on impossible, so it’s worth getting it right.

With the design nailed all I had to do was wait. And hope. And dream. And then wait a little longer. One thing is for sure – buying custom isn’t for the impatient. Bespoke ‘one bike at a time’ builders like Seven will take the time it requires to do their jobs and that could be a month or it could be three. However long it takes, they’ll keep you informed along the way. Eventually the Seven Cycles box will arrive on the back of the UPS truck and I defy anyone not to have an elevated heart rate and sweaty palms as they pop it open.

As soon as I laid eyes on the raw, unbuilt frame I knew I’d been sent exactly what I’d asked for. The only question that remained was whether its geometry was going to ride the way I predicted it would. I built it up with a 100mm-travel RockShox SID XX fork and SRAM X0/XX bits. Wheels are either Fulcrum XL29s, Bontrager RXL29s or ENVE Carbons depending on the ride/mood I’m in, and finishing kit is a work in progress, with Control Tech Ti Mania and Easton parts popping up, as well as an AX Lightness Daedalus seatpost.

Suffice to say the bike as built is sexy, surgical and sleek. The natural silver-grey sheen of titanium is extremely attractive. When it’s washed it’s like a surgeon’s blade, when it’s dirty it looks like it was made for mud. Dirt just makes it look more handsome – a bit like the rider!

Sola 29 SLX

The ride

The ride, the ride… Oh if only I could plug you into my central nervous system. You’d see why I get home late, leave for work early and have an idiotic grin on my chops the entire day. Seven use their lightest Cirrus MTB titanium tubing on the SLX and the way it transmits vibration from the ground to your brain is like nothing else I’ve ever ridden, and I’ve ridden a lot of bikes in 20 years of testing. I was stunned to silence in 20 yards – that’s a new record for me.

The Seven has continued to leave me stunned in the three months and 800 miles we’ve been together. I’ve a mental Rolodex of how hundred of bikes have performed over my standard singletrack test loop. On the Seven, it takes a physical effort to wipe the smile off my face. I’m able to glide over terrain that normally makes hardtails feel hard and harsh, and in the big ring, spinning up what are normally horrible drag climbs I’m able to remain seated instead of resorting to the saddle-hover needed on most other hardtails.

As you turn the pedals you get the standard titanium frame feeling of having half-flat tyres, which takes a bit of getting used to. But there’s more. Seven have created a hardtail frame that feels more like a full-suspension one. When you hit bumps, the frame only transmits what feels like half the impact. It’s not just the rear end that soaks up the hits, either – the front end feels like it stretches a fraction and the whole chassis feels moulded to the ground.

Asked by other riders what the Seven feels like to ride I’ve found myself using terms like alive, dynamic, forgiving, even smooth and plush – two words normally reserved for full-suspension bikes. It doesn’t hurt that it weighs 21lb – a great weight for a 29er, which enables big ring, full gas riding whenever you feel like laying it down. On group rides my buddies now know that if I show up on the Seven they’re in for hurt.

rear triangle

In fact, the only one who’s not getting hurt is me. The comfort of the thin titanium tubes means I can indulge in rides where the time spent riding is the time I have available, not the time I can physically endure. I think comfort as a target for bike manufacturers has long been overlooked. Sure it isn’t as sexy a sell as ‘the stiffest’ but if you can’t bear to sit on the thing after a few hours, what’s the point? Over the course of a long ride it can add up to leave you fresher and more able to belt out the watts when other riders are beaten.

The trade-off is in chassis stiffness. To make a titanium frame that’ll build into a 20lb bike with a focus on comfort, you have to be prepared to give away something. Some would undoubtedly find this specific Sola SLX too soft, but for me it’s as stiff as it needs to be. Hammering it, it doesn’t ghost shift, there’s no brake rub and the frame doesn’t feel mushy. I’d say it’s 95 percent accurate at cross-country speeds.

That percentage would be higher if it had a tapered-steerer-compatible head tube and oversize bottom bracket (since delivery, Seven have begun offering BB30 as an option). But if it had those things, other details like the size and thickness of the main tubes would have to be adjusted and it would be heavier and maybe not as comfortable, getting away from the core reason for doing it this way. Besides, would I really notice the five percent increase in accuracy? Look at it this way: the Sola isn’t anyway near as stiff as my 2011 Niner Air 9 Carbon but it’s three, maybe four times as comfortable. Perfect for me.

I simply haven’t ridden a better bike for my kind of wide ranging cross-country/trail riding than the Seven Sola 29 SLX. A custom frame like this doesn’t come cheap and the top-end build pictured here would cost in excess of £6,000 – enough to buy two or three full-suspension trail bikes. But you can’t judge a bike like the Seven like that. It’s what one of my riding buddies described as the “wife bike” – the one you want to settle down with.

mountain bike climb

Hand Finish

The Hand Finish

Frame Refinish - after
Frame Refinish-after

You can get your custom Seven painted just about any way you want.  Still, for our bare Titanium bikes, we prefer one finish and only one finish, and people wonder why.

Just to describe what we do, so you have some context: First we take the best US-milled 3-2.5 Titanium tubing available, and we cut, butt, miter and cope it to look like a bike frame.  Then we load it into a frame jig and weld it together, checking alignment 17 times throughout the process.  Finally we face and thread the bottom bracket, before passing the complete frame to our finishers.

That’s when the fun starts.

The finishers take the frame and wheel it out with a buffer.  The first pass eliminates discoloration around the welds.  Then they go at it by hand with some Scotchbrite, before adding decals, head badge and any other accessories on the build sheet. Each bike takes roughly two hours to finish.  It takes a certain amount of patience and strong forearms.

The result is a clean, lustrous look. We like that it exposes every last piece of craft we’ve put into the frame.  You can see the quality of the tubing, the quality of the welds. It lays bare our process.

The reason it’s the only finish we offer is that it’s the only one that will hold up over the lifetime of the bike. If you scratch it, you can Scotchbrite it out and return it to new. Beat it up over time, we can fix it.  There is no point in the future of one of our frames that we can’t restore its original shine.  This is not true of any other Titanium finish we’ve seen or experimented with.

As with everything we do at Seven, “by hand” just seems to yield the best result.

650b-Specific Mountain Bikes: A Perspective From Seven Cycles

wheel

When Nino Schurter won the first World Cup mountain bike race of the season in Pietermaritzburg, South Africa on a bike with 650b wheels, it sent a ripple through the cycling universe. Anyone viewing 650b – essentially a size midway between 26″ and 29″ – as a novelty wheel up to that point, suddenly had to take this new/old wheel standard very seriously.

Seven has been building 650b-specific mountain bikes for a few years now, and in our experience, 650b gives a nice balance between the handling of a 26″ wheel and the obstacle clearance of a 29″ wheel. It manages to maintain momentum better than the 26″ and dive through switchbacks better than a 29″. Certainly, for smaller riders interested in the benefits of a larger wheel, the 650b standardcan beeasier to build a well-fit frame around thana 29″.

What we find, time after time, is that there is no one-size-fits-all solution for building a great bike, and we think 650b is a good example of the big benefits to be gained by thinking outside of the conventional wisdom.

preparing to ride the trails
Seveneers Joe Wignall and Dan Vallaincourt take a break from the shredding

At Seven, several of our employees are riding 650b for their everyday trail bike, including Joe Wignall who has his set up single-speed with an eccentric bottom bracket and belt drive system, and John Lewis who stuck with chain drive, but is also running single speed. These bikes give a pretty pure trail experience. You work for the climbs. You pick your way through the more technical descents. There’s a lot of stripped down, old-school fun to be had on bikes like these.

The industry looks to be expanding into 650b for the coming season, and while the cynical among us might view that as just another opportunity to sell stuff to cyclists, the benefits of 650b are pretty tangible, once you take the time to ride it.

Mike Broderick and Mary McConneloug Proto IMX 29ers, Part Two of Two: The Feedback

Mike and Mary celebrating on the podium
Mike and Mary Take The Podium At The Trans Andes Challenge

It’s hard to transition from Chile to Northern California to South Africa with a stable of race bikes, enough tools to build them up and break them down, all the other clothing and gear you need, and a shred of remaining sanity to carry you through the first mountain bike World Cup race of the season.

But that’s exactly what Seven riders Michael Broderick and Mary McConneloug did over the last 6 weeks, and their brand new Seven IMX SLX race bikes went along for a maiden voyage on some of the most challenging dirt in the world.

Mike reported back to us from the post-race wind down in South Africa:

“Mary and I literally turned hundreds of heads as we spent the weekend on our new IMX bikes at the World Cup in Pietermaritzburg. The bikes stand apart visually from our previous frames and the majority of the bikes being used by our competitors. The carbon Ti lugged IMX frame design is visually stunning and we were able to build these bikes up to the limit. They really look fantastic!â€

If looks could kill, they wouldn’t have the race though. Mike added, “Those capable of looking beyond the initial bling (including all our on-site sponsors) were impressed especially by the inclusion of the 44mm head tubes as these (or alternative oversize head tubes) are fast becoming an industry standard.â€

We built these bikes specifically to give Mike and Mary critical advantages in the toughest race conditions and according to Mike, performance improvements were obvious straight away. “The bikes ride with a lighter touch. Changing directions requires less effort in tight, low-speed situations, and they exhibit an overall greater level of confidence, inspiring control throughout the majority of demanding off-road situations.â€

Mike and Mary are particularly agile riders, so we aimed for a more lively ride, an overall more manageable bike for all trail purposes, which meant shortening the chain stays for maximum obstacle clearance capability. Mike said, “Mary and I both feel an increased ease when we lift up and over obstacles. Mary was especially tuned in to the ease of being able to manual her bike over trail obstacles without pedal input. This allows for a quicker trail read as last minute input and corrections are more significant and accurate. This, along with the stiffer front end, translates into greater confidence when hanging it out at high speed.â€

He also said,

“The bikes absolutely track quicker around corners when traditionally steered (cutting through the apex) as well as with our preferred hairpin corner attack (hugging the inside of the corner before the apex, steering the front wheel through while initiating a rear brake skid to slide the rear). We both have a good stable feeling on these bikes enabling us to keep our feet clipped in while performing this move all the way through to letting off the brake, regaining traction and pedaling out for a quick exit.â€

How’s that for a pro maneuver?

Shorter chain stays and subsequently shorter overall wheelbase make the bike more agile, but the oversized head tubes give them maximum stiffness and stability. Mike and Mary appreciated that stability as well.

Mike said,

“The increased front end stability is probably most apparent when muscling the bike through low speed trail obstacles that take maximum strength and input on the bars and pedals at the same time. A good example would be when out of the saddle splitting a large trail feature (between the tires) and torquing the pedals and the bars simultaneously to try and move forward. I can feel that there is far less flex and a better power transfer in these cases. The increased stiffness at this point also really helps with the confidence when in a rough spot and looking to commit to a feature that is at the limits of our confidence levels.â€

As you can imagine we’re anxious to see how the bikes perform at the next round of the World Cup in Houffalize, Belgium next month. As we type, Mike and Mary are getting their gear together, breaking everything down again for shipping and trying to keep their bodies on track for what promises to be a grueling and exciting MTB season.

Mike Broderick and Mary McConneloug’s Proto IMX 29ers, Part One of Two

Mary McConneloug

When we sat down to design new bikes for Mike Broderick and Mary McConneloug to race in the upcoming World Cup mountain bike season and possibly the Olympics, the big question was how to improve on the bikes they’d been riding for the two previous seasons.

Their all Ti Sola SLXs have been race winners. When most other riders on the circuit were trying to pack more carbon onto their bikes, Mike and Mary persisted, quite successfully, with titanium. We went to the absolute limit of our building experience to make those bikes light for them. We shaved down their cable guides. We drilled holes in their bottom brackets. But they were all metal bikes. And they were fast.

So, the biggest change they made from past seasons was to go to a Ti/carbon mix frame, our IMX SLX, but without the integrated seat post (ISP) that distinguishes that model. Instead Mike and Mary opted for an adjustable 30.9mm post that is fatter, stiffer and has a thinner-walled carbon than standard seat posts. The weight savings and added stiffness were big bonuses, and we ultra-butted all the frame tubing to save every last gram for them.

Mike knew he wanted to experiment with shorter chain stays to optimize front end maneuverability. A shorter overall wheelbase lets you make tighter turns on technical courses, and the agility he hoped to gain suits both Mike’s and Mary’s aggressive riding style.

To dial in the chain stay length we built multiple rear end modules to test the interaction and spacing of wheels, tires and components. It’s a game of millimeters, but over time we settled on the right set up for them, and then built their bikes based around that rear triangle.

Mike and Mary also knew they wanted to add over-sized head tubes and tapered forks for extra front end stiffness, and they wanted an opportunity to experiment with Cane Creek’s new angled headset. As an inveterate tinkerer, Mike thought he and Mary could both dial in the handling response they liked for each course. Being able to adjust that responsiveness might be a huge advantage in the variable weather conditions they see while racing in Europe, Africa and South America.

The final act was getting the bikes in their hands. We shipped them out to coincide with a short stopover in California, between their pre-season training in Chile, where they won the Mixed Open category of the Trans-Andes Challenge, and the first World Cup race of the year in Pietermaritzburg, South Africa.