Articles – Page 36 – Seven Cycles

Going Fast

In the last few weeks, we’ve talked about Going Up, the process of designing a climbing bike, and Going Far, the things that go into a long distance bike, which might be a century bike, a touring bike or might be a full-blown randonneuring machine. This week we turn our attention to race bikes.

The bike industry has traditionally worked backwards from race bikes to fill shop floors with race look-alikes for everyday riders who will never turn a crank in anger. What is good for the pros, so the logic goes, must be good for you, too, and for some very small number of non-pro riders, that could be true.

As with all our bikes, we start with the purpose of the bike and work forward. Going fast requires being able to sit in a comfortable, aerodynamic position, to be able to handle your bike in tight spaces, and to get good power transfer through the rear triangle.

As custom builders, getting to that perfect position is a given. We can replicate exact saddle and grip positions from a bike fitting. We can dial in handling by adjusting headtube angle and fork rake to produce the exact characteristics the rider wants. We can adjust the stiffness of the rear triangle by selecting specific diameter chainstays, up to and including the 1″ stays we call “race stays.”

Our 622 SLX rivals all of today’s carbon race machines for weight and stiffness, but it incorporates more road feel and better comfort than those bike through its unique combination of laser-cut titanium lugs and filament-wound carbon tubing. Our all-Ti Axioms make great criterium bikes for their ability to absorb the heavy impacts of racing on imperfect pavement and the way they come through the occasional crash.

The technology of race bikes evolves quickly, and adapting to new component standards can be a challenge, but with a custom bike these things can be considered during the design phase to leave you with as many upgrade options as possible.

The thing is, bikes aren’t fast. Riders are fast. The best way for the rider to Go Fast is to design a bike around them that fits them perfectly, handles the way they want it to and transfers as much of their power as possible.

Ricardo’s Sola S

This is our friend Ricardo’s Sola S, delivered through Bikestage in Madrid. Ricardo opted for a 142×12 thru axle rear end for his bike, and the final build came out very clean and spare. The bead-blasted logo gives it that touch of class, too.

Seven at Syllamo’s Revenge

Syllamo’s Revenge is a 50 mile mountain bike race that takes place annually in the Ozark Mountains of northern Arkansas. 50 miles is a long way to go on a mountain bike, but it’s even longer (not technically, but certainly effort-wise) when you’re racing single-speed as our friends Hart and Boomer were. They were 1st and 2nd place in the single-speed division, left and center in the photo below. We built both their bikes with our friends at Outdoors, Inc in Memphis.

Hart’s picture and words below:

Seven team,

I just returned to Memphis from north central Arkansas having completed “Syllamo’s Revenge” for the 7th year in a row. This was the first year on a Seven as I took delivery in December from the good folks at Outdoors, Inc. Joel worked with you guys to get me setup on the perfect rig, and keeps it running smoothly and reliably. The conditions were great and I finished 2nd overall and 1st single-speed feeling tired but not nearly as beat up as in previous years. I credit the Custom Ti frame for the difference. I am very pleased. This is my third race on the bike and I am happy to report the Seven has put me on the top of the podium in each of the three.

Thank you guys for an awesome bike!!!

Picture attached. (I’m in the center. Boomer also rides a Seven and is standing to my right.)

Warmest Regards,

Hart

John’s 622 SLX

Here’s a 622 SLX we built with our friends at Bean’s Bikes in Berwyn, PA. This Ti/carbon machine is finished with our Lug Deluxe paint scheme with a special “rattlesnake” finish on the carbon that shows a different color depending on the light and the angle you’re looking from. The decals are a custom Glitter Gold outline.

On the Road – Evergreening Paris

We caught the red eye, the last flight on the departures board before an air traffic controller’s strike shut down the Charles De Gaulle Airport. We set our bikes up at the hotel (we’ve got reassembly down to 22 minutes now), and immediately hit the pavement, excited to see Paris from the saddles of our Evergreen SLs.

It might be lame to cast Paris, the City of Light, as an amalgam of American metropolises, but to us, Paris was like a perfect cross between Boston and New York, windy and narrow like our hometown in Massachusetts, but congested and massive like the Big Apple. Fortunately, Paris’ motorists don’t resemble Americans. They drive a bit more slowly (the roads don’t permit much speed), and they are far more accepting of cyclists. We don’t recall a single horn being honked in anger, despite the fact all the bike lanes run opposite the flow of traffic. This was confusing and occasionally terrifying, for a pair of over-tired, over-excited Americans, but it seems to work well for Parisian cyclists. It would be hard not to want to ride a bike there every day, or all day on the one day you had, which is what we did.

Characterizing the riding in Paris in general is hard, because the whole city doesn’t conform to any one style. There are cobbles aplenty, as well as the asphalt you expect from any place this massive, but there is also a fair amount of dirt and mixed-surface, whether it’s grassy verges or sprawling park and garden spaces. Our shake out ride did more than whet our appetites for more, but having skipped food after coming off the plane, we needed to get back to the hotel and prepare for the real exploration to come.

We gave ourselves some time the next morning to rest and refuel, not throwing legs over top tubes until 10am, but it was fourteen more hours before we returned. We wanted to maximize our ride time here, to do a week’s worth of exploration in the one day we had, and there is always something to see in Paris, some bit of architecture, an open plaza, an opportunity for food that kept us going until midnight.

We followed the Seine out into the suburbs, clinging to it like a trail of bread crumbs, trusting it to take us someplace great, and it delivered everything, from the drama of the city center, to factory districts, to bucolic suburbs and a lone hill overlooking the magical sprawl. We found urban double track, and abandoned, nearly primitive sections of the city’s manufacturing past.

We could have kept on riding, but rolling back into the hotel after a full day and night on our bikes seemed smart with the Paris-Roubaix Challenge on tap for the weekend. We did another ride around the city center in the morning, before repacking our bikes and boarding the train to Lille and the shuttle on to Saint Quentin, where our adventure would continue.