Frameset Details | Gravel 758 Rider-Ready | Seven Cycles skip to content
Current Lead Times: Simple-Custom Framesets: 1 week. Full Custom Bikes: 7 weeks.

U.S. Built Custom Bicycles in Titanium and Titanium-Carbon Mix

Gravel 758 Frameset Design Details


This page provides the universal specifications and component interface information for Seven's Gravel 758 Rider-Ready frameset.


Quick Links


Frame Features

This information overrides any photographs or text counter to the following.

Frame Element Specifications
Wheel & tire clearance
  • Optimal size: 700c x 56 mm knobby
  • Maximum size: 700c x 58 mm knobby
  • Minimum recommended size: 700c x 43 mm
This bike is not designed for use with 650b wheel systems.
Chainring size Optimized for 1x maximum chainring sizes, brand specific:
  • Shimano gravel: 40t
  • SRAM Wide: 36t
  • SRAM road/gravel: 30t
The frame will not fit a larger chainring.
Fits 2x 48/31t chainrings. The frame will not fit larger chainrings. (This constraint is chosen to keep the chainstays as short as possible while maintaining clearance for 58 mm tires.)
Dropouts Choose either:
  • Universal Derailleur Hanger (UDH), T-Type compatible
  • Seven integrated titanium hanger
Complete dropout design details.
Frame mounts, optional, upcharge may apply Optional: Fender mounts on dropouts, chainstay bridge, and seat stay bridge. (Seat stay bridge mount placement is the popular 90-degree orientation to the hub.)
Optional: Third water bottle mount.
Seat stay design, choose one Choose either at no charge:
  • Moto stays provide a smoother ride and additional tire traction.
  • Inline stays provide a classic aesthetic.

Frame Details

This information overrides any photographs or text at odds with the following.

Frame Element Specifications
Wheel & tire clearance
  • Optimal size: 700c x 56 mm knobby
  • Maximum size: 700c x 58 mm knobby
  • Minimum recommended size: 700c x 43 mm
This bike is not designed for use with 650b wheel systems.
Chainring size Optimized for 1x maximum chainring sizes, brand specific:
  • Shimano gravel: 40t
  • SRAM Wide: 36t
  • SRAM road/gravel: 30t
The frame will not fit a larger chainring.
Fits 2x 48/31t chainrings. The frame will not fit larger chainrings. (This constraint is chosen to keep the chainstays as short as possible while maintaining clearance for 58 mm tires.)
Shifter & derailleur routing, choose one Your choice of many, including:
  • External mechanical/cable actuated with cable stops (+$125 charge)
  • Internal Shimano Di2 electronic (825, 8100, or 9200) internal wiring ports (+$0 charge)
  • SRAM AXS electronic wireless (+$0 charge)

Shimano note: Di2 routing is not compatible with older Shimano parts kits including 815, 8000, and 9100 series.

Upcharge may apply.

Brake housing routing, choose one Choose one, upcharge may apply:

External: Zip tie guides for optimal performance, smooth front-end handling, ease of maintenance, low maintenance, and light weight. Compatible with hydraulic and cable-actuated disc brakes.

Available with internal brake routing upgrade for an upcharge.

Derailleur hanger Choose either:
  • Seven titanium integrated hanger
  • Universal Derailleur Hanger (UDH), (upcharge applies)

Note about Seven's titanium integrated hanger: Not replaceable or disposable. Seven's titanium derailleur hangers are the toughest in the industry. We've never had one break. Our new generation of thru-axle dropouts has yet to see a hanger damaged beyond bike shop service. We have no need for fragile replaceable hangers. Neither will you.

Note about the UDH system: While Seven's in-house machined titanium UDH dropout is the toughest on the market, the hanger is replaceable. It is either aluminum or plastic and will get destroyed repeatedly over the life of the bike. Buy and ride with multiple replacement parts.

Complete dropout design details.

Hub spacing & details Designed for 142 x 12 mm thru-axle hub.
Thru-axle Robert Project thru-axle included with frame:
  • If Seven's integrated hanger: Total length 163 mm x 1.5 thread pitch
  • If UDH: Total length 167 mm x 1.0 thread pitch

Hex head 6 mm,torque 12.0 Nm.

Brake caliper mountNative flat mount for 140 mm rotor. If using a 160 mm rotor, an adapter is required, not supplied with the frame. Shimano SM-MA-R160D/D. This part does not come with the brake caliper. For SRAM, the 160 mm rotor adapter is typically included with the brake caliper.
Bottom bracket shell
  • If external cable & housing routing: BSA, threaded, 68 mm length
  • If internal cable, wiring, & housing routing: T47 oversized, threaded, 68 mm length
Headtube diameter 44 mm, universal standard
Seat tube diameter Outside diameter for front derailleur clamp: 34.9 mm (1.375")
Seat post retention system Rear slot with external seat top clamp, included with frame.
Seat post diameter 27.2 mm
Elements not included & not available
  • No rack mounts (This bike is not designed for racks or more than 17 lbs of gear. More information here.)
  • No pump peg
  • No chain hanger

Fork Details

We specify Enve's Adventure carbon fork.

Seven certifies only Seven and Enve forks for this bike project. No other fork is available or certified for this bike.

This information overrides any photographs or text counter to the following.

Fork Element Specifications
Make & Model Enve Adventure Fork
Wheel & tire clearance
  • Optimal size: 700c x 56 mm knobby (when set to 5.5 cm rake)
  • Maximum size: 700c x 58 mm knobby
  • Fits fenders with 53 mm tire
This bike is not designed for use with 650b wheel systems.
Brake housing routing Internal through fork leg
Hub spacing & details Fits 100 x 12 mm thru-axle hub.
Brake caliper mount Native 160 mm rotor mount. If using a 180 mm rotor, brake caliper typically includes fork mount adapter.
Steerer diameter
  • Tapered 1.125" to 1.5"
    Thru-axle Enve thru-axle included with fork: Hex head 6 mm, hub specifications 100 x 12 mm, total length 125 mm, 1.5 thread pitch, torque 12.0 Nm.
    Options included
    • Fender mounts
    • Pack & accessory mounts

    Torque specifications

    For more information, visit our torque settings page.

    Frame Element Torque Setting, Nm Torque Setting, Inch/lbs Bolt or screw dimensions
    Seat top binder/clamp/collar 6.8 - 9.0 Nm 60 - 80 inch/lbs M6x1, 25 mm length, 5 mm hex head cap screw, stainless steel
    Rear wheel thru-axle, Robert Axle Project 12.0 Nm 97 inch/lbs 12 x 1.5 thread pitch
    6 mm hex wrench
    Fork thru-axle, Enve 8.0 Nm 71 inch/lbs 12 x 1.5 thread pitch
    6 mm hex wrench

    Frameset Compatibility

    This information is correct for this specific frameset model only and is not necessarily true for Seven's other offerings.

    Fork limitations: The only forks Seven certifies for this bike are Seven branded or the specific fork we specified for this design. For safety, no other fork should be used. Using any other fork voids the frame warranty and is not endorsed by Seven.

    Do not modify this fork in any way. Do not add anything to this fork. This is a high-performance product.

    Motor assist: Not compatible with any motor assist systems. Warranty is void if a motor assist system is employed.

    Indoor trainer: Seven's warranty is valid with all indoor trainer systems.