Gravel Force | Endurance Fit | Seven Cycles skip to content
Current Lead Times: Simple-Custom Framesets: 1 week. Full Custom Bikes: 7 weeks.

U.S. Built Custom Bicycles in Titanium and Titanium-Carbon Mix

Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order
Rider Ready Endurance Fit with SRAM Force AXS

The Ready with Endurance Fit geometry is an excellent choice for long-distance riders. Endurance Fit's position has about a 3 cm higher front end and a slightly shorter reach. A more comfortable position for the long ride.

The Ready with SRAM Force AXS 1x gravel parts kit is a good choice, too. It's light, flawless, smooth, and has the widest gear range of any gravel kit.

The combination of our titanium frame, the SRAM groupset, Hed Emporia wheelset, and the rest of the kit means you'll be riding the toughest, most capable, best-performing gravel bike on the roads and trails.

All this for $7,995.
gravel-riding-open-to-mountains
Heading to the mountains where durability, self-sufficiency, and ease of maintenance are paramount. If you're on The Ready, you are.

Groupset Details

Part Description
Shift & brake levers SRAM Force AXS 1x12-speed; shifting: Electronic
Front derailleur None
Rear derailleur SRAM XO1 12-speed
Brake calipers Force hydraulic
Rotors SRAM Centerline: centerlock, 160 mm front & rear
Crankset Force, length is size specific
Chainrings 40t, 12-speed
Bottom bracket SRAM DUB
Cassette SRAM 1295: 12-speed 10-52t
Chain Force flattop, 12-speed with quick link
Gear ratios Minimum-maximum: 0.77 to 4.0

Build-Out Details

Part Specification
Fork Fork choice determined by frame size and head tube angle. The frameset comes with either Seven's Matador 750 carbon disc, or
Enve's Gravel. Thru-axle for both forks is 6 mm hex head.
Wheelset, 700c Hed Emporia GA Performance, aluminum, centerlock, thru-axle: front 12 x 100 mm, rear 12 x 142 mm, thru-axle is 6 mm hex head.
Tires 700c x 38 mm Vittoria Terreno Dry, tubeless-ready, folding
Tire pressure management Tubeless: rim tape, valve stems, sealant
Handlebar Zipp Service Course: aluminum, black; width is size specific
Bar tape Fizik Vento Microtek tacky: Thickness 2.0 mm, black
Stem Zipp Service Course: aluminum, black; length is size specific
Seat post Zipp Service Course: aluminum, diameter: 27.2 mm
Saddle Fizik Terra Argo X5, metal rails, black
Headset 44 mm Cane Creek 40, black
Headset Spacers Aluminum spacer pack: 3x 1.0 cm, black
Not included
  • Pedals
  • Power meter
  • Fenders for fork or frame
  • Water bottle cages or bottles
  • Any other items that may be shown in the bike photos

Substitutions available. Omissions possible. Components subject to change.

Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order

Standard Fit Geometry

Choosing the right size: If you're not sure of your frame size, visit your local bike fitter to ensure your ideal fit.

See the frameset design details here.

To order your Seven Gravel Ready bike, choose your size.

Frame size
& top tube, effective[1]		 49.0 cm 51.0 cm 52.0 cm 53.0 cm 54.0 cm 55.0 cm 56.0 cm 57.0 cm 58.0 cm 59.0 cm 60.0 cm 62.0 cm
Frame Stack, BB-HT 53.0 55.1 56.4 57.7 59.0 60.3 61.3 62.3 63.3 64.5 65.8 68.4
Frame Reach, BB-HT[2] 35.7 36.2 36.4 36.5 36.7 37.0 37.8 38.2 38.6 39.0 39.6 40.4
Head tube length 10.1 12.1 13.5 14.7 16.0 17.1 17.9 18.8 19.6 20.9 22.2 25.0
Head tube angle 68.00° 69.00° 69.50° 70.00° 70.50° 71.25° 71.50° 72.00° 72.25° 72.50° 72.50° 72.75°
Seat tube angle 76.25° 75.25° 74.75° 74.25° 73.75° 73.50° 73.50° 73.25° 73.00° 72.75° 72.75° 72.50°
Bottom bracket drop 8.2 8.0 7.8 7.7 7.6 7.5 7.5 7.4 7.4 7.3 7.3 7.2
Bottom bracket height 27.2 27.4 27.6 27.7 27.8 27.9 27.9 28.0 28.0 28.1 28.1 28.2
Chainstay length 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8
Front center[3] 60.7 60.7 60.7 60.7 60.7 60.7 60.9 61.2 61.4 61.9 62.9 64.4
Seat tube length[4] 36.0 37.5 39.0 42.0 44.5 47.5 48.5 49.5 50.5 51.5 52.5 55.0
Top tube slope 18° 18° 18° 16° 14° 12° 12° 12° 12° 12° 12° 12°
Standover height[5] 70.3 72.0 73.7 76.0 77.8 80.1 81.1 82.2 83.2 84.2 85.3 87.9
Rider weight range, loaded, optimal (lbs)[6] [7] 100-150 120-175 135-185 150-200 165-225 180-240 195-255 205-265 215-275 225-290 235-305 255-335
Size-specific components

These component sizes are ideal in most situations. However, you can choose alternate lengths if you prefer. Specifications subject to change.

Frame size
& top tube, effective[1]		 49.0 cm 51.0 cm 52.0 cm 53.0 cm 54.0 cm 55.0 cm 56.0 cm 57.0 cm 58.0 cm 59.0 cm 60.0 cm 62.0 cm
Stem length 8.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 13.0
Stem angle 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84°
Handlebar width 38 40 40 42 42 42 42 44 44 44 46 46
Crank arm length (mm) 167.5 170.0 170.0 170.0 170.0 172.5 172.5 172.5 172.5 175.0 175.0 175.0
General Frame & Bike Geometry Notes

Measurements in centimeters and degrees. Bike geometry shown with 700c x 40 mm knobby tires. Specifications subject to change.

  1. Top tube length is effective: Starting from the centerline of the head tube and top tube intersection measured horizontally to the ground, back to the seat tube.
  2. Frame reach warning: This popular measurement is not a good gauge of proper bike fit. Also, the term is not accurate and, therefore, often causes confusion. Seven qualifies the term with "BB-HT" to help define the measurement. Regardless of these shortcomings, we include frame reach BB-HT because it has become a popular industry shorthand for comparing one bike size to another. While the frame reach numbers Seven shows here are accurate, Seven does not take responsibility for an ill-fitting bike if you rely on the frame reach number. Top tube length is much more relevant and helpful in bike-to-bike fit comparisons.
  3. Toe overlap warning: Because toe overlap is determined, in large part, by factors not related to frame geometry, we cannot guarantee that your bike setup will not have any overlap. Make sure you are comfortable with the length of the front center before ordering. You can check your current bike to compare front centers.

  1. Seat tube length is measured from the center of the bottom bracket to the intersection of the top tube's centerline. To determine the total seat tube length from the top edge of the seat top to the center of the bottom bracket, add about 4.5 cm.
  2. Standover height is measured midway along the top tube, the actual typical point where a rider stands on a bike. Be aware when comparing standovers; some companies use differing standards.
  3. Optimal rider weight range: This is a recommendation for optimal ride performance. However, if your loaded weight[7] is above the recommendation, in most cases, the bike will still handle and perform better than any stock bike. For specific component weight limits, check with the manufacturer.
  4. Rider weight, loaded, includes all on-bike attire, equipment, tools, hydration, food, saddle bag, and any other items that weigh something. On average, this total is 14+ lbs. for a three-hour self-sufficient summer ride. Loaded weight does not include the bike.
  5. Handlebar width is measured center-to-center at the hoods' contact point with the bar.

Specifications subject to change. See the frame specifications page for all other frameset details.

Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order
unbound-200-gravel-start
The Ready Endurance Fit is the perfect setup for longer rides like the Unbound 200. And, the titanium frame means zero potential damage from grit and mud.
Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order

Place your order

Choose your ideal size from the geometry chart above.