Gravel GRX | Endurance Fit | Seven Cycles skip to content
Current Lead Times: Simple-Custom Framesets: 1 week. Full Custom Bikes: 7 weeks.

U.S. Built Custom Bicycles in Titanium and Titanium-Carbon Mix

Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order

Rider Ready Endurance Fit with Shimano GRX

The Ready with Endurance Fit geometry is an excellent choice for long-distance riders. Endurance Fit's position has about a 3 cm higher front end and a slightly shorter reach. A more comfortable position for the long ride.

The Ready with Shimano GRX gravel parts kit is a good choice, too. It's durable, simple to maintain, and every bike shop knows how to work with it. The bike is our best Ready value.

The combination of our titanium frame, the Shimano groupset, Hed Emporia wheelset, and the rest of the kit means you'll be riding the toughest, worry-free, best-performing gravel bike on the roads and trails.

All this for $7,495.

evergreen-gravel-open-sky
Seven's Endurance Fit for gravel riding can be perfect for long rides that bring you to new places.

Groupset Details

Part Description
Shift & brake levers GRX 812 2x11-speed; shifting: mechanical
Front derailleur GRX 810
Rear derailleur GRX 810, 11-speed
Brake calipers GRX 812 hydraulic
Rotors Shimano RT800 rotors: centerlock, 160 mm front & rear
Crankset GRX 800, length is size specific
Chainrings 48/31t 11-speed
Bottom bracket Shimano BBR60
Cassette Shimano HG800: 11-speed 11-34t
Chain Shimano HG701, 11-speed with quick link
Gear ratios minimum-maximum: 0.91 to 3.45

Build-Out Details

Part Specification
Fork Fork choice determined by frame size and head tube angle. The frameset comes with either: Seven Matador 750 carbon disc, or
Enve's Gravel. Thru axle for either fork is 6 mm hex head.
Wheelset, 700c Hed Emporia GA Performance, aluminum, centerlock, thru-axle: front 12 x 100 mm, rear 12 x 142 mm
Thru axle is 6 mm hex head.
Tires 700c x 40 mm Continental Terra Speed, tubeless-ready, folding
Tire pressure management Tubeless: rim strips, valve stems, sealant
Handlebar Zipp Service Course: aluminum, black, diameter, 31.8 mm; width is size specific
Bar tape Fizik Vento Microtek tacky: Thickness 2.0 mm, black
Stem Zipp Service Course: aluminum, black, angle 97/83 degree, stack 41 mm, diameter 31,8 mm; length is size specific
Seat post Zipp Service Course: aluminum, setback 20 mm, diameter: 27.2 mm
Saddle Fizik Terra Argo X5, metal rails, black
Headset 44 mm Cane Creek 40, black
Headset Spacers Aluminum spacer pack: 3x 1.0 cm, black, 1-1/8"
Not included
  • Pedals
  • Power meter
  • Fenders for fork or frame
  • Water bottle cages or bottles
  • Any other items that may be shown in the bike photos
Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order

Endurance Fit Geometry

Choosing the right size: If you're not sure of your frame size, visit your local bike fitter to ensure your ideal fit.

See the frameset design details here.

To order your Seven Gravel Ready bike, choose your size.

Frame size
& top tube, effective[1]		 49.0 cm 51.0 cm 52.0 cm 53.0 cm 54.0 cm 55.0 cm 56.0 cm 57.0 cm 58.0 cm 59.0 cm 60.0 cm 62.0 cm
Frame Stack, BB-HT 53.0 55.1 56.4 57.7 59.0 60.3 61.3 62.3 63.3 64.5 65.8 68.4
Frame Reach, BB-HT[2] 35.7 36.2 36.4 36.5 36.7 37.0 37.8 38.2 38.6 39.0 39.6 40.4
Head tube length 10.1 12.1 13.5 14.7 16.0 17.1 17.9 18.8 19.6 20.9 22.2 25.0
Head tube angle 68.00° 69.00° 69.50° 70.00° 70.50° 71.25° 71.50° 72.00° 72.25° 72.50° 72.50° 72.75°
Seat tube angle 76.25° 75.25° 74.75° 74.25° 73.75° 73.50° 73.50° 73.25° 73.00° 72.75° 72.75° 72.50°
Bottom bracket drop 8.2 8.0 7.8 7.7 7.6 7.5 7.5 7.4 7.4 7.3 7.3 7.2
Bottom bracket height 27.2 27.4 27.6 27.7 27.8 27.9 27.9 28.0 28.0 28.1 28.1 28.2
Chainstay length 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8 44.8
Front center[3] 60.7 60.7 60.7 60.7 60.7 60.7 60.9 61.2 61.4 61.9 62.9 64.4
Seat tube length[4] 36.0 37.5 39.0 42.0 44.5 47.5 48.5 49.5 50.5 51.5 52.5 55.0
Top tube slope 18° 18° 18° 16° 14° 12° 12° 12° 12° 12° 12° 12°
Standover height[5] 70.3 72.0 73.7 76.0 77.8 80.1 81.1 82.2 83.2 84.2 85.3 87.9
Rider weight range, loaded, optimal (lbs)[6] [7] 100-150 120-175 135-185 150-200 165-225 180-240 195-255 205-265 215-275 225-290 235-305 255-335

Size-specific components

These component sizes are ideal in most situations. However, you can choose alternate lengths if you prefer. Specifications subject to change.

Frame size
& top tube, effective[1]		 49.0 cm 51.0 cm 52.0 cm 53.0 cm 54.0 cm 55.0 cm 56.0 cm 57.0 cm 58.0 cm 59.0 cm 60.0 cm 62.0 cm
Stem length 8.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0 13.0
Stem angle 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84° 96/84°
Handlebar width 38 40 40 42 42 42 42 44 44 44 46 46
Crank arm length (mm) 167.5 170.0 170.0 170.0 170.0 172.5 172.5 172.5 172.5 175.0 175.0 175.0

General Frame & Bike Geometry Notes

Measurements in centimeters and degrees. Bike geometry shown with 700c x 40 mm knobby tires. Specifications subject to change.

  1. Top tube length is effective: Starting from the centerline of the head tube and top tube intersection measured horizontally to the ground, back to the seat tube.
  2. Frame reach warning: This popular measurement is not a good gauge of proper bike fit. Also, the term is not accurate and, therefore, often causes confusion. Seven qualifies the term with "BB-HT" to help define the measurement. Regardless of these shortcomings, we include frame reach BB-HT because it has become a popular industry shorthand for comparing one bike size to another. While the frame reach numbers Seven shows here are accurate, Seven does not take responsibility for an ill-fitting bike if you rely on the frame reach number. Top tube length is much more relevant and helpful in bike-to-bike fit comparisons.
  3. Toe overlap warning: Because toe overlap is determined, in large part, by factors not related to frame geometry, we cannot guarantee that your bike setup will not have any overlap. Make sure you are comfortable with the length of the front center before ordering. You can check your current bike to compare front centers.

  1. Seat tube length is measured from the center of the bottom bracket to the intersection of the top tube's centerline. To determine the total seat tube length from the top edge of the seat top to the center of the bottom bracket, add about 4.5 cm.
  2. Standover height is measured midway along the top tube, the actual typical point where a rider stands on a bike. Be aware when comparing standovers; some companies use differing standards.
  3. Optimal rider weight range: This is a recommendation for optimal ride performance. However, if your loaded weight[7] is above the recommendation, in most cases, the bike will still handle and perform better than any stock bike. For specific component weight limits, check with the manufacturer.
  4. Rider weight, loaded, includes all on-bike attire, equipment, tools, hydration, food, saddle bag, and any other items that weigh something. On average, this total is 14+ lbs. for a three-hour self-sufficient summer ride. Loaded weight does not include the bike.
  5. Handlebar width is measured center-to-center at the hoods' contact point with the bar.

Specifications subject to change. See the frame specifications page for all other frameset details.

Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order
gravel-remote-stone-wall
Seven's Endurance Fit gravel bike is designed to bring you farther into the unknown.
Navigate: Other Gravel Ready Bikes Parts Kit Geometry Order

Place your order

Choose your ideal size from the geometry chart above.