skip to content
Current Lead Times: Rider-Ready Framesets: 4 weeks. Full Custom Bikes: 7 weeks.

Building Your Titanium and Carbon-Titanium Bikes in the USA for 29 Years

Featured Product: Internal Cable Routing for Shimano Di2 Compatibility

Axiom Sl with Di2

For riders planning to take advantage of Shimano’s Di2 groupset, Seven Cycles offers an internal cable routing option on our frames.

Seat tube with Di2 port

Since the introduction of Di2, Seven has been building frames with standard cable routing that allows riders to use zip-ties to secure the Di2 cables. Now we offer the clean, protected look of internal routing on all road and cyclocross models.

Di2 front derailleur setup

These images show an Axiom SL frame with frame modifications for internal routing. The Internal Cable Routing option is available on new bike orders only.

dropouts with Di2 port

Bicycling Magazine: Seven Alaris

by Valigra (Cambridge, Mass.)

Component Highlights

Shimano Ultegra 18-speed group, 12-23t 9-speed cassette, 39/53t chainrings, 3T Prima 199 bar, Wound-Up seatpost, Chris King headset, Mavic Open Pro 32-hole rims, 700×23 Continental Gran Prix 300 tires

Profile

Titanium dream machine

Best Thing About This Bike

Not-of-this-earth craftsmanship and endless custom options at no extra charge.

Worst Thing

The price. Seven shaves about $600 bucks off the price of their butted titanium Axiom frame by using straight gauge tubes in the Alaris, but it’s still far from what we’d call affordable. Our test bike came with goodies an all-carbon fork and seatpost, which also jacked up the price.

The Ride

The beauty of Seven bikes is that they’re custom, so each one is designed to meet the customer’s needs. Our Alaris came in one of Seven’s Signature Sizes, which is as close as they get to offering a standard geometry, and per our request, a slightly sloping top tube and extended head tube was added. Handling was set up to be quick and ideally suited to the skilled, corner-crazy criterium junkie, while the carbon fork and curvaceous rear triangle offered an exceptionally smooth ride without compromising road feel.

Have It Your Way

There’s no such thing as a stock Seven—each frame is made to order, from the fit and geometry down to the ride, which is tuned to meet individual rider needs through careful tubing selection. Plush, stable century cruiser, razor-sharp race rig or somewhere in between—it’s your choice.

The Verve

When the November print issue went to press, Seven called this bike the Verve. Since then, they changed the name to Alaris. Same bike we planned on testing, just a different name.

Seven Words About This Bike

Clean. Smooth. Sexy. Exotic. Personalized. Litespeed killer.

The Details

Weld beads are so clean and uniform they look almost sculpted, and they thought of every detail, from aluminum water bottle bolts to a chain hanger, pump peg, nifty laser-engraved headtube badge and a composite seat tube sleeve to keep the post from seizing. They even make a titanium headset spacer stack to give the front end a cleaner look.

History Lesson

At the helm of Seven Cycles is framebuilder Rob Vandermark, who helped sculpt Merlin Metalworks into the legendary company that once supplied Lance Armstrong’s Subaru Montgomery team. Rob left Merlin and started Seven in ’97, and the company as almost named “Wright Cycles” in reference to those brothers who tinkered with bikes and accidentally made an airplane. But there were too many ways to spell “Wright”, and for various reasons, the founders settled on Seven.

Buy It If

You lust for custom titanium from a true master and want to save a buck or two with straight-gauge tubes.

Forget It If

The frame price still sounds like a lot of money compared to the custom steel and production titanium out there.

roadbikereview.com: Seven Axiom SG Wins Choice Award

By Robert Millar

Seven is pleased to announce that the Axiom SG road model is the recipient of the 2006 roadbikereview.com Choice Award in the Frame category. Awarded at Interbike to companies whose products earned “Best Of” recognition, these are the highest rated products on the roadbikereview.com site. Winners are selected according to the highest rated products that met a minimum number of reviews for each category.

The Seven Axiom SG garnered “Best Of” status by earning a total rating of 5 out of 5, the highest possible rating. What makes this all the more impressive is that the Axiom was one of the most frequently reviewed products to earn this rating.

Here is just a sampling of the praise for the Axiom SG

“Super-stable at high-speed, lively feel to the frame, visually gorgeous, silky smooth (never chattery), superb frame craftsmanship, constant admiring compliments from other riders (the bike, not the rider…).”

“A joy to ride. Silk on the road, really. Makes me want to ride all day. Everything good about a bike, nothing bad. Any harshness or spookiness has vanished.”

“Awesome bike!!!! The whole Seven experience was a blast and the frame came out PERFECT!! I am able to ride longer, harder and faster and most importantly comfortably.”

“An excellent investment. I smile a lot when I am out on this bike. And I’m out on it a lot (for me). I no longer look for excuses to not ride and am looking for reasons to go for a ride. That seems to be the best thing you can say about any bike: it makes you want to ride.”

“The ride characteristics: Silky smooth, lively. I test-rode high-end aluminum and carbon frames and found them either harsh or dead feeling.”

Singletrack Magazine: Boutique Titanium, Seven Sola Reviewed

Singletrack Cover

Seven Sola

Seven Cycles were born out of ex-employees of Merlin Titanium, (one of the first modern companies to start building with titanium, back in the ’80s). Merlin’s chief MTB designer Rob Vandermark, and several other important folk, left Merlin to set up Seven in 1997 and haven’t really looked back. They initially made just Ti frames, but moved into also making steel and now carbon frames as well. They’re based just outside Boston, Massachusetts.

The Detail

Our test frame is a production Sola frame, but with a custom paint job. Paint is an up-charge option on all Ti Sevens—but you’re equally welcome to leave it bare if you wish. We weren’t that sure about the paint to start with, but stacked against the other Ti bikes on test, it certainly stands out and is a welcome change to the utilitarian dull gray of a plain Ti frame.

For two grand, though, you’d want the beauty to be a lot more than skin deep though. Looking over the Seven, there’s a lot of simplicity and neatness going on. The seat collar is big, but neat. The dropouts are sculpted but not ostentatious and the welds and tube diameters seem ‘just right’.

There’s a lot of titanium bike history gone into this Seven. The tubing is seamlessly double butted and the seatstays feature long ‘S’ bends—both innovations developed while Rob Vandermark was at Merlin. Ironically the ‘S’ bend stays were to increase mudroom but also to give more power to cantilevers. The ‘S’ these days is much longer and results in parallel stays with an elegant kick out at the dropouts. The Sola is Seven’s butted titanium frame (the unbutted Verve is £ 1600) and comes in at barely more than 3Lbs for a 16in frame, so it’s no real surprise that it built into the lightest bike on test.

With our stock Shimano XT build and 80mm Manitou R7 forks, the Sola builds into a bike on the verge of ‘impressively light’ and a lighter, leaner or bigger, chunkier build would be easy depending on your penchant. At around 241lbs though, it felt just right for high speed blasting.

The components are a similar spec to the build on the Moots—good old reliable XT shifters, transmission and brakes, with Shimano XT wheels. They can be run tubeless, but we were keeping to our stock Kenda tires so ran tubes. The only other differences were with a Hope stem and a Thomson seatpost instead of the Moots Ti items on the Moots (there’s something very satisfying about the ‘zzzip!’ of the machined ridges on a Thomson post as it slides into a precisely reamed seat tube.

The paint is very wet looking and obviously many coats thick—this can be easily seen where it ends and the Ti frame starts showing. There’s a I mm step there, protected by a shaped vinyl strip—I suppose there’s not much else they could do here, but it would make sense to get a few spares to protect the vulnerable paint ends from chipping.

The paint has already shown signs of wear, despite helicopter tape in high risk areas. The stop-free center of the top tube is already showing scratching from the brake hose and there are a couple of other scuffs.

The Ride

Like all the bikes here, there is none of the expected ‘angels singing’ ride experience. At their best, all Ti bikes ride like ‘a bike’ and buying one won’t make you a faster rider unless it’s because it inspires you to ride bikes more. The Seven falls into that category. It’s simply a wonderfully inspiring bike to ride.

The light weight of the Seven can be felt in a couple of ways—riders used to regular steel hardtails were climbing hills a couple of gears higher, but those used to more burly trail bikes found the Sola to be just on the edge of ‘too light’ on faster descents as it can get bounced around a little. The racer boy 80mm forks (the other bikes had 100mm) that the frame was designed for meant that the Sola was happier on fast, twisty trails rather than rock fests, but it still coped admirably with some slow, thrutchy stuff. Technical climbs were particularly fun as the combination of light weight and surefootedness made slow and steppy stuff fun again.

Seven Sola Details

In terms of flat-out speed and performance on high speed singletrack, the Sola was a joy to ride. Throw it into comers, lean it over and big ring it out the other side. I even found myself dropping back from the ‘pack’ just so I could wind up another sprint. There was a definite ‘snap’ to the ride and changes in speed just needed a moment’s notice.

The Sola is definitely a bike that won’t let you walk past without an appreciative look and on the trails it won’t let you go home until you’ve gone further than you were intending to. I could fault the scufflness of the paint job, but there’s nothing to stop you saving money and having a bare frame anyway. Besides, if you’re going to have a bike for ten years, it might as well gain a few scars and wrinkles- after all, the owner is certainly going to… which we have been very fortunate to draw upon. Plus, I think there is a very good work ethic out here.”

26″ vs. 29″ Wheels: Seven Helps Cyclingnews Devise the Ultimate Test

With the help of two identical Seven IMX hardtails, the folks at Cyclingnews are attempting to answer the question, once and for all, “Is bigger better or is less really more?”

While pondered for years, previous attempts to definitively answer the question of whether a 29″ wheel is better than the traditional 26″ mountain bike wheel have failed because of too many variables between the test subjects. So for the first time ever,Cyclingnews and Seven Cycles have removed all variables to create the perfect test.

In describing the two Seven’s, Cyclingnews notes, “We worked closely with the specialists at Seven Cycles to obtain a pair of Seven’s premier carbon and titanium IMX hardtail frames. Seven’s unique talents were tapped to normalize the ride qualities of the two frames by varying the titanium tubing stock as well as the carbon fiber layups, and the handling characteristics were matched as closely as possible.”

“Of equal importance was the fit of the two IMXs and this was calibrated down to the last millimeter relative not only to the rider, but also to the ground. To that effect, critical dimensions such as cockpit length, saddle height and setback, handlebar height and sweep, and even bottom bracket height are 100 percent identical between our decidedly high-zoot test pair.”